Ukil | SES Size Box
Ukil Machinery Company are international textile warping experts. Ukil manufactures direct warpers, sectional warpers and spun sizing products.
Ukil, Ukil Machinery Company, Textile, Warping, Warpers, Manufacturing, International, Korea, China, India, USA, United States, spun, filament, Direct warper, Sectional warper, spun sizing,
23448
page,page-id-23448,page-child,parent-pageid-23404,page-template-default,ajax_fade,page_not_loaded,,wpb-js-composer js-comp-ver-4.3.4,vc_responsive
 

SES Size Box

Expert Squeezer

The eXpert Squeezer-F utilizes a conventional roll arrangement featuring a 190mm diameter squeeze roll, 200mm diameter master roll and a 180mm diameter immersion roll. The size box features clean lines with no arms, levers or bearings exposed and all roll journals extend through the frame before being supported. All mechanicals are located outside the integral frame and are covered with guards. Insulated size pan made from type 304SS with an 80 liter capacity. Maximum squeeze roll loading 1500 kg. Overflow weir for precise level control empties into a 100 liter size reservoir tank made from 304SS, insulated with double jacket, close coil steam heated with pump, temperature and level controlled, 100 mesh screen filter. A spray bar is located above the squeeze roll to eliminate hard size marks and provide size to the nip when stopped. A two (2) roll positive driven dry feed roll assembly is mounted at the entrance of the box and will be driven by a tension controlled AC motor using feedback from the entering load cell guide roll.

General Specifications PDF

Control Cabinet

 

apparel-vertical

Size Box Profile

Standard Specifications

Number of size boxes: 1 or 2 Vertical Exit DDDS
Working width: 1800 / 2000 / 2200 / 2400mm
Draw Roll Assy.: Motor driven tension controlled
#1 Squeeze roll rubber covered:  150mmØ x working width + 200mm
Size Rock driven roll:  230mmØ working width + 200mm
#2 Squeeze roll rubber covered: 230mm Ø uni-squeeze x working width + 200mm
Squeeze roll rubber coverings: 65 durometer
#1 Squeeze roll loading: 0-20kN
#2 Squeeze roll loading: 0-40kN
Seal-less pan design:  Roll journals are above the size level
Sheet exit:  Single or wet-split
Tension control:  by load cell rolls (± 1.0 GPE)
Stretch:  Monitored to within 0.01% stretch
Pan capacity (Teflon coated):  180 / 200 /220 / 240 liters
Filtration:  Screen type
Size temperature control: RTD/on-off steam valve
Size heating:  direct steam heating
Size level control: by Over-flow weir
Size add-on:  by continuous calculation or PLEVA (optional)
Storage kettle:  Closed steam coil / 1200 / 1500 / 2000 liter
Cooking kettle:  Open steam coil 1000 liter
Kettle pumps: From cooker to storage and storage to sizer
Controls:   Temperature control for each kettle

 



		
UKIL-request

REQUEST MORE INFORMATION ABOUT THE ENTIRE LINE OF UKIL PRODUCTS.